The Original EZ-RJ45 CAT6 Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. By reducing the distance between the wire twists and contacts, performance is optimised.
Key Features
Suitable for Unshielded Twisted Pair
0.2 - 0.26mm² (24 - 23 AWG)
Rated to 1Gb
Recommended for data applications only
Through holes allow wire pairs to be inserted through front of connector for faster terminations
Max Cable Outer Diameter: 6.98mm (0.275")
Max Insulation Diameter (Conductors): 1.016mm (0.040")
Works with solid or stranded wire – separate connectors not required, reducing inventory and confusion
Simple one-piece design - bars or liners not required
