137mm Railed Heatshrink Repair Sleeve - 1m .
Adhesive lined, heatshrink wraparound sleeve comes complete with a flexible stainless-steel locking channel. This provides a permanent closure system. The heatshrink is covered with a thermochromatic paint which changes colour when achieving the correct shrink temperature.
Wraparound heatshrink is easy to install in situ over live cable without cutting the cable or shutting down power. Used for general re-jacketing and sealing applications, and for protection of damaged cable or repair of cable joints.
|Material:||Cross Linked Polyolefin|
|Operating Temperature:||-30˚C to +70˚C|
|Tensile Strength:||17 MPa|
|Tensile Strength After Heat Aging:||168 Hours at 150˚C 14MPa|
|Elongation After Heat Aging:||168 Hours at 150˚C 300% Min.|
|Carbon Black Content for UV Resistance:||2% Min.|
|Low Temperature Flexibility:||No Cracking at -40˚C|
|Longitudinal Shrinkage:||10% Max.|
|Type||Heatshrink Repair Sleeve - Including Rail|
|Max ID Recovered (mm)||34|
|Recovered Wall Thickness||2.3|