DSG-Canusa IAKT Thin Wall Black Adhesive Lined Heat shrink 24-8mm 3:1 - 1.22M Length - IAKT 24.0/8.0 BK 1.22m

Part no: IAKT 24.0/8.0 BK 1.22m

IAKT Black Adhesive Lined Heat Shrink Tubing 24-8mm

Technical Data	Current Values	Test Methods
	Material
Material	Polyolefin, modified; free of lead	n/a
Specific gravity	1.25 g/cm³ max	ASTM-D 792, A-I
Shrink ratio	3:1	n/a
Longitudinal shrinkage	15% max	ASTM-D 2671
	Mechanical
Tensile Strength	15 MPa	IEC 60684-2
Elongaion	410%	IEC 60684-2
Secant modulus	175 MPa max	ASTM-D 882
	Thermal
Tensile strength after heat aging (168 h at 150°C)	14 MPa	IEC 811-1-2
Elongation after heat aging (168h at 150°C)	310%	IEC 811-1-2
Tensile strength after heat shock (4h at 200°C)	15 MPa	IEC 811-1-2
Elongation after heat shock (4h at 200°C)	370%	IEC 811-1-2
Cold bend test	Does not break at -55°C	ASTM-D 2671 Meth.C
Combustion behaviour	Jacket self-extinguishing	FMVSS 302
Shrink temperature	95°C min	n/a
Storage temperature	40°C max	n/a
Continuous operating temperature	-55°C to 110°C	IEC 216
	Chemical
Corrosive action	Non-corrosive	ASTM-D 2671 Meth. A
Compatibility with copper	Non-corrosive	ASTM-D 2671 Meth. B
Resistance against chemicals	Good	N/a
Water absorption	0.15%	VDE 0472
	Electrical
Dielectric strength	22 kV/mm	VDE 0303 Part 2
Volume resistivity	10¹⁴Ω x cm	VDE 0303 Part 3

(Size: 216.1 KB)