250ml Re-enterable Gel Seal - GEL-SEAL

Part no: GEL-SEAL
Re-Enterable Gel Seal 250ml
Re-Enterable Gel Seal 250ml
1 Per pack

Frequently bought together

  1. Re-Enterable Gel Seal 250ml
  2. +
Total price: £0.00
Description
GelSeal is a re-enterable insulating clear gel, designed for the protection of electrical and electronic enclosures, boxes, terminal blocks, trunking, pipes and mechanical parts against water, moisture, dirt, dust and mechanical shock.

GelSeals shock dampening characteristics, as well as its dielectric and self healing properties make it most suitable in hostile environments. It forms an environmental shield around anything it encases and can be used as a potting compound to keep dirt and corrosion out of critical areas. It can also be used as a sealant where periodic re-entry for inspection or repair is required. GelSeal can also be used to reinforce fatigue on conductors due to vibration.

GelSeals hydrophobic properties cause it to repel water, helping to keep the encased object clean, dry and corrosion free. It can be cured and used as a cushion into which sensitive components may be imbedded for protection from corrosion and vibration. It is ideal for sealing the contents of boxes and cabinets from the effects of corrosive atmospheric elements. GelSeal is also used as an insulator between two close set conductors on low voltage applications.
Specification
Key Features: Non-Toxic, Environmentally friendly, Re-enterable, Long shelf-life, High dielectric properties, High level of adhesion, IP65 protection against water, moisture, dust and dirt. Easy mix twin pack resin for added safety.
Specification
Material Features: Non-Toxic, Environmentally friendly, Re-enterable, Long shelf-life, High dielectric properties, High level of adhesion, IP65 protection against water, moisture, dust and dirt. Easy mix twin pack resin for added safety.
Potlife (process time) 20?C: 20 Minutes.
Gel-Time 20?C: 50 Minutes.
Viscosity 20?C: 1000 cps
Exothermic Peak (ASTM D2471): 28?C
Density: 0.91 g/cm2
Elongation at Break: 95%
Temperature Resistance: 80?C (120?C short)
Corrosion of Copper (MS 17000,1139): Non-corrosive
Insulation Resistance at 500V DC: 1.2 x 10 12 ohm
Volume Resistance bij 500 V DC: 0.6 x 10 16 ohm
Water Absorption (ASTM D570): 0.36%
Water Sensitivity (TA-NWT-000354): 0%
Chemical Resistant Against: 2n, H2SO4, CaCO3
Colour: Transparent Amber
Shelf Life: 18 Months
Downloads
(Size: 391.3 KB)
More Info
More Information
SKUGEL-SEAL
TSI Code394756578
Pack Quantity1
TypeInsulating Gel
ColourClear