Moisture Barrier Kits - GRP-MOISTURE-KIT

Moisture Barrier kits are suitable for all types of power and signalling cable. Ideal for producing a moisture proof seal.

Application of Use:
Step 1. Position the Shrink Sleeve over the Cable end and strip back the Cable Sheath to the desired length.

Step 2. Cut a piece of Black Hot Melt Tape and wrap around the centre Conductors. Wrap further layers between each concentric layer of Conductors.

Step 3. Once all Cores have been laid up, press a final piece of Hot Melt Tape around the end of the Cable Sheath overlapping onto the Conductors.

Step 4. Position the Shrink Sleeve as shown above and shrink into place. TheHot Melt Tape will be seen to flow thus producing a moisture proof seal.