Martindale ET4000 18th Edition Multifunction Tester


The ET4000 and ET4500 testers carry out all the tests needed to verify the safety of electrical installations in domestic, commercial and industrial wiring installations in accordance with latest BS7671 18th Edition Wiring Regulations published July 2018.

The testers simplify 18th edition testing by having the latest fuse tables for Zs values built-in together with red and green LED indicators for instant pass/fail results.

Everything about the ET Series has been designed to save time and make testing easier, from the capability to display all results from an RCD autotest on one screen to the inclusion of useful Help menus at the press of a button. Even the soft carry case has been designed to enable testing without having to unpack and repack the instrument every time. On connection the testers carry out an automatic polarity and wiring check identifying potentially dangerous wiring faults in advance of any testing.

Fast, reliable high current and non-trip loop testing comes as standard together with a high level of input protection and a CAT IV safety rating . Both models include phase sequence indication and TRMS voltage measurement to cover every job and ensure voltage levels can reliably be measured in all applications.

Both models are supplied with a full range of accessories including Martindale test leads with clips and prods all terminated with industry standard 4mm plugs. The slimline Martindale remote start probe with test button is included as standard allowing one handed measurement in those areas that are hard to reach.

Key Features

  • Includes all tests required to verify the safety of electrical installations
  • Built-in third amendment Zs loop impedance tables and help screens
  • Red and green LED indicators for instant pass / fail results
  • Automatic polarity and wiring check on connection
  • Test and Go soft carry case, no need to unpack and repack
  • RCD auto test and ramp test with all results on one screen
  • Fast, reliable high current and non-trip loop testing
Insulation Test: 50VDC, 100VDC, 250VDC,500VDC, 1000VDC
Ranges 19.99MΩ/99.9MΩ/199.9MΩ
Continuity Test: Short circuit current >200mA
Ranges 19.99Ω/199.9Ω/1999Ω
RCD Test: 10mA, 30mA, 100mA, 300mA,500mA, 1000mA.
Type AC, A, F, S
0.5, 1, 5 x I auto and ramp test
Ranges 40.0ms/max time
Loop Test: Dual display (Loop Resistance of PFC)
High Current L-L L-N, Non-trip L-PE
Ranges 9.99Ω/99.9Ω/999Ω/9.99kΩ
Voltage: TRMS 0-550V
Frequency 9.99Hz/499.9Hz
Phase rotation
Complies With: BS EN 61010-1
BS EN 61557
BS 57671:2018 18th Edition
BS EN 61326-1
Dimensions: 230 x 103 x 115mm
Weight: 1.3kg approx
Includes: TL36 3 lead set RBG, TL207 mains lead set RBG, TL180 Remote probe, soft carry case and strap, quick start plus CD, calibration verification certificate, 6×1.5V AA low-loss rechargeables, mains charger
File Downloads
(Size: 1 MB)
(Size: 1.5 MB)
More Info
More Information
Pack Size1